JETWELD LH-70
»Top Features : Low hydrogen. Smooth arc performance.
»Typical Applications : General fabrication. Military low hydrogen applications.
»Welding Positions : All, except vertical down.
FLEETWELD SP
» Top Features : Deep arc penetration. Light slag with minimal arc interference. Excellent vertical and overhead capability.
» Typical Applications : Steel with moderate surface contaminants. Cross country and in-plant pipe welding. Square edge butt welds.
» Welding Positions : All, except 3/32" diameter.
SHIELD ARC HYP+ 1/8 x 50 EO Ø 3.2 mm
» Top Features : Light slag for minimal arc interference. Deep penetration. Clean, visible weld puddle. Superior puddle control.
» Typical Applications : Root pass welding of up to X80 grade pipe. Hot, fill and cap pass of up to X65 grade pipe. Vertical down welding.
» Welding Positions : All.
» Top Features : Light slag for minimal arc interference. Deep penetration. Clean, visible weld puddle. Superior puddle control.
» Typical Applications : Root pass welding of up to X80 grade pipe. Hot, fill and cap pass of up to X65 grade pipe. Vertical down welding.
» Welding Positions : All.
EASY ARC
» Top Features : Basic low hydrogen electrode < 5ml/100g. All position welding except vertical down. Impact properties exceeding at 27J at -30C. Smooth bead appearance and low spatter.
» Typical Applications : Pressure vessels. Petrochemical. Shipbuilding and Offshore, Power Generation.
» Welding Positions : All, except vertical down.
INNERSHIELD NS-3M
» Top Features : A low carbon, low manganese, low silicon
general purpose electrode. Provides the lowest hardness and is best
suited for use with the Lincolnweld® 700
series of active fluxes.
» Top Features : A low carbon, low manganese, low silicon
general purpose electrode. Provides the lowest hardness and is best
suited for use with the Lincolnweld® 700
series of active fluxes.
PREMIER WELD BF-1
» Top Features : High current range - 400amp, enable it can work with6mm electrode. S Plus model machine is installed with output choke and can weld cellulouse at vertical down. Adjustable hot start and arc force. Touch Start TIG makes it easy to achieve great arc start with minimal or no tungsten contamination. Extended cable up to 100m (350A, 70mm2) is suitable for long distance welding.
» Top Features : High current range - 400amp, enable it can work with6mm electrode. S Plus model machine is installed with output choke and can weld cellulouse at vertical down. Adjustable hot start and arc force. Touch Start TIG makes it easy to achieve great arc start with minimal or no tungsten contamination. Extended cable up to 100m (350A, 70mm2) is suitable for long distance welding.
MERIT S-6
» Top Features : High current range - 400amp, enable it can work with 6mm electrode. S Plus model machine is installed with output choke and can weld cellulouse at vertical down. Adjustable hot start and arc force. Touch Start TIG makes it easy to achieve great arc start with minimal or no tungsten contamination. Extended cable up to 100m (350A, 70mm2) is suitable for long distance welding.
» Top Features : High current range - 400amp, enable it can work with 6mm electrode. S Plus model machine is installed with output choke and can weld cellulouse at vertical down. Adjustable hot start and arc force. Touch Start TIG makes it easy to achieve great arc start with minimal or no tungsten contamination. Extended cable up to 100m (350A, 70mm2) is suitable for long distance welding.
LINCOLNWELD L-60
» Top Features : A low carbon, low manganese, low silicon general purpose electrode. Provides the lowest hardness and is best suited for use with the Lincolnweld® 700 series of active fluxes.
» Top Features : A low carbon, low manganese, low silicon general purpose electrode. Provides the lowest hardness and is best suited for use with the Lincolnweld® 700 series of active fluxes.
PRIMACORE LW-71
» Top Features : High current range - 400amp, enable it can work with 6mm electrode. S Plus model machine is installed with output choke and can weld cellulouse at vertical down. Adjustable hot start and arc force. Touch Start TIG makes it easy to achieve great arc start with minimal or no tungsten contamination. Extended cable up to 100m (350A, 70mm2) is suitable for long distance welding.
» Top Features : High current range - 400amp, enable it can work with 6mm electrode. S Plus model machine is installed with output choke and can weld cellulouse at vertical down. Adjustable hot start and arc force. Touch Start TIG makes it easy to achieve great arc start with minimal or no tungsten contamination. Extended cable up to 100m (350A, 70mm2) is suitable for long distance welding.
INDALCO Alloy 4043
» Top Features : Designed for welding heat-treatable base alloys and including 6XXX series alloys. Lower melting point and more fluidity than 5XXX series filler alloys. Low sensitivity to weld cracking with 6XXX series base alloys. General purpose filler alloy and one of the most widely used welding and brazing alloys. Excellent when aesthetics are of importance. Not recommended for material to be anodized.
» SHIELDING GAS : 100% Argon. Argon/Helium Mixtures. Flow Rate: 30-50 CFH (14.2 – 23.6 L/min)
» Top Features : Designed for welding heat-treatable base alloys and including 6XXX series alloys. Lower melting point and more fluidity than 5XXX series filler alloys. Low sensitivity to weld cracking with 6XXX series base alloys. General purpose filler alloy and one of the most widely used welding and brazing alloys. Excellent when aesthetics are of importance. Not recommended for material to be anodized.
» SHIELDING GAS : 100% Argon. Argon/Helium Mixtures. Flow Rate: 30-50 CFH (14.2 – 23.6 L/min)
PRIMACORE LW-81K2-H
» Top Features : Robust impact values @ -40°C & -60°C. Consistent properties at a wide range of heat inputs. Excellent operating characteristics. All position single and multiple pass semiautomatic and automatic wire. Slag removal is easily achieved with hand tools. Manufactured under a quality system certified to ISO 9001 and JIS requirements.
» Typical Applications : PRIMACOREC® LW-81K2 is designed specially for use in butt and fillet welding for 550MPa high strength steels in all positions. It is suitable for applications, such as offshore and shipbuilding.
» Welding Positions : All
» Top Features : Robust impact values @ -40°C & -60°C. Consistent properties at a wide range of heat inputs. Excellent operating characteristics. All position single and multiple pass semiautomatic and automatic wire. Slag removal is easily achieved with hand tools. Manufactured under a quality system certified to ISO 9001 and JIS requirements.
» Typical Applications : PRIMACOREC® LW-81K2 is designed specially for use in butt and fillet welding for 550MPa high strength steels in all positions. It is suitable for applications, such as offshore and shipbuilding.
» Welding Positions : All